The Steps of the Clean Water Mitigation Process
9/2/2021 (Permalink)
Finding out that you need water cleanup in your commercial building in Buford, GA, is never fun. If you must require the services of water mitigation specialists, however, clean water remediation is usually the least problematic. Here are the steps you can expect the technicians to follow during pipe burst cleanup.
1. Initial Consultation
As soon as you call, the representative on the other end of the line may ask questions designed to get to the root of the problem. This helps the company plan which equipment to bring to your building and can make the process flow more smoothly.
2. On-Site Assessment
The real plan is formed when technicians arrive at your property. They inspect the building and determine a course of action. They may also provide emergency services, such as shutting the water or power off to the area if you have not already done so.
3. Water Extraction
Using industrial pumps, the professionals remove water from the area. The sooner the pipe burst cleanup begins, the less likely you are to experience secondary damage, so it's imperative that as much water is removed as quickly as possible.
4. Surface Drying
To prevent mold, everything must be dried. Dehumidifiers tame the moisture in the air; fans and wet vacuums pull water out of fabrics and off surfaces.
5. Restoration Process
Even if the water damage is a result of a supply line breaking, that doesn't automatically mean the damage wasn't extensive. Walls and insulation, as well as ceiling tiles and flooring, may still have to be removed and discarded. The restoration experts then replace them and try to make sure wallpaper, paint or tiles match up before the job is done.
Even if your damage is a case of pipe burst cleanup, it's best to take care of it as soon as possible. By mitigating clean water damage quickly, you can avoid secondary damage and get back in your building.